Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trusted Duct Repair & Sealing for Upper East Side Homeowners
Leaky ductwork is the quiet reason a lot of Upper East Side apartments never quite feel comfortable. Air you paid to cool or heat slips out through torn flex runs and unsealed joints before it reaches the room, and in prewar buildings with tight service shafts, that same gap can pull dust and basement air back into the supply. Our team repairs and seals the duct system itself, not just the vents you see. Our technicians have up to 14 years of experience, and we treat Duct Repair & Sealing as a core service rather than an upsell tacked onto a cleaning. We repair and seal, not just clean. Same-day service is often possible across the Upper East Side. Call (844) 443-3814. We answer 24/7.
What Our Duct Repair & Sealing Service Includes
Every job starts with the full air pathway, not a guess. Here’s what each part of the work covers and when it comes into play.
Duct Sealing
Duct sealing closes the gaps, seams and disconnected joints where conditioned air escapes, usually with mastic or foil tape rated for ductwork rather than the hardware-store cloth tape that dries out and falls off. You need it when rooms stay stuffy while the system runs, or when utility bills climb without a change in how you use the apartment. We seal the accessible runs and connections and confirm the joints are sound before we call the work done.

Flex Duct Repair
Flex duct is the corrugated plastic-and-wire product common in kitchen and bathroom exhaust runs and in retrofit supply lines throughout Upper East Side apartments. It tears, sags and separates at the collar, and a crushed or kinked run chokes airflow just as badly as a blocked filter. We repair or replace damaged sections and re-support sagging runs so the duct keeps its shape and the air keeps moving.

Metal Duct Repair
Sheet-metal trunk lines are standard in older Upper East Side buildings, and over time they separate at the seams, dent at the takeoffs and pull apart where a branch run meets the main. A failed metal joint leaks a surprising share of the system’s air and can whistle or rattle when the blower kicks on. We repair the damaged sections and re-secure the connections so the trunk holds pressure the way it was designed to.

Duct Insulation
Insulation wraps the duct to keep the conditioned air at temperature, and it matters most on runs that pass through an unconditioned shaft, basement or attic space. When the wrap is torn, wet or missing, the air warms or cools before it ever reaches the register, and condensation can form on cold metal. We repair or replace damaged insulation so the air arrives at the room the way it left the unit.
Mastic Sealant
Mastic is a brush-on sealant that bonds to metal and stays flexible as the system heats and cools, which is why it’s the standard for a lasting seam. It’s the right call at joints that keep opening up and where tape has already failed once. We clean the surface, apply mastic to the seams and connections and let it cure so the seal actually holds through a heating and cooling season.
Air Leak Repair
Air leak repair is the diagnostic part: finding where the system loses air before patching anything. We trace the leak with the blower running, check plenum connections, register boots and the joints where a run passes through a wall, then repair what’s actually leaking instead of resealing the entire system. It’s often the single change that makes the biggest difference to even temperatures across an apartment.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Brands We Service for Duct Repair & Sealing
We use Rotobrush and Nikro systems for the cleaning and prep work around a repair, and Abatement Technologies negative-air equipment to keep loosened debris contained while we’re working. Rotobrush’s rotary brush and vacuum design is built for the inside of residential ductwork, which matters when a repair means we have to get the run clean before sealing it. Nikro equipment handles the heavier vacuum work that a repair job on a larger metal trunk often calls for.
On the air-quality side, we install and service Honeywell and Aprilaire products, so if your repair opens the door to a filtration or humidity upgrade, that can happen in the same appointment rather than a second visit. Whether you have Honeywell, Aprilaire or any other make, we can help.
Signs You Need Duct Repair & Sealing Right Now
- Rooms that never match the thermostat. If the bedroom runs hot while the living room stays cold, the problem is often a leak or a disconnected run feeding one of them. Sealing the failed joint usually evens out the difference.
- Dust settling on surfaces soon after cleaning. A torn duct or open seam pulls dust from a wall cavity or shaft directly into the supply. If the apartment gets dusty fast, the leak is worth tracing.
- Whistling, rattling or a hiss at the register. Air forced through a gap or a loose takeoff makes noise you can hear when the blower runs. It’s a symptom that something has come apart behind the wall.
- Higher energy bills with no change in use. Leaky ducts make the system work longer to hit the same temperature. The bill climbs first; comfort problems usually follow.
- Visible tears, loose tape or crushed flex runs. Any exposed duct that’s torn, coming apart at the collar or squashed against a joist is losing air right now. This is the easiest problem to catch early and the cheapest to fix before it spreads.
Our Duct Repair & Sealing Process – Step by Step
- 1
Full system inspection. We check the accessible duct runs, connections, boots and plenum with the blower running, looking for tears, separated joints, crushed flex and failed tape or mastic from a previous repair. Nothing gets sealed until we know where the air is actually going.
- 2
Containment and cleaning. Before we open anything up, we set up Abatement Technologies negative-air equipment so loosened debris is captured and exhausted rather than blown back into the apartment. Our technicians use Rotobrush and Nikro systems to clean the run so the sealant bonds to a clean surface.
- 3
Repair and re-sealing. We repair or replace the damaged section, re-support crushed or sagging flex, and seal the joints with mastic or foil tape rated for the job. This is where we repair and seal, not just clean: the leak gets fixed, not covered over.
- 4
Verification. We run the system again and check the repaired connections for leaks and airflow, so you can hear and feel the difference at the register before we pack up. If something still isn’t right, we track it down now rather than after we leave.
- 5
Before-and-after documentation and sanitizing. We take before-and-after photos of your own ducts, and if you choose it, apply a Guardsman-backed sanitizing treatment to the clean, sealed ductwork for ongoing antimicrobial surface protection inside the system.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Upper East Side?
We set one flat price per system, agreed in writing before any work starts, so there’s no surprise invoice once the technician is on site. Duct repair and sealing in Upper East Side varies widely with the size of the system, the number of runs and how much of the ductwork is accessible, but most jobs fall into recognizable ranges:
| Service | Typical estimated range |
|---|---|
| Targeted air leak repair (single run or joint) | $180 – $450 |
| Mastic sealing of accessible joints and seams | $350 – $900 |
| Flex duct repair or replacement (per run) | $250 – $600 |
| Metal duct repair at trunk and takeoffs | $400 – $1,200 |
| Duct insulation repair or replacement | $300 – $900 |
| Full-system sealing with pre-clean | $900 – $2,200 |
What affects the price: how many runs need attention, whether the duct is inside a wall or up in a shaft where access is difficult, whether a crushed flex run needs replacing rather than repairing, and whether a pre-clean is needed before sealing. Prewar buildings on the Upper East Side often have tight service shafts, and that access work is part of what the estimate reflects.
The way to avoid overpaying is to get the scope in writing, item by item, and to insist on a flat price per system rather than a per-vent number that grows as the technician walks around. Our estimate is free and includes what’s actually included in the work. Call (844) 443-3814 for an exact quote.
Duct Repair & Sealing Near Upper East Side – Our Service Area
We handle Duct Repair & Sealing across the Upper East Side and the neighborhoods around it, including Murray Hill, Morningside Heights, Roosevelt Island, Midtown, Tribeca, the Financial District and Battery Park City. We also work across the river in Greenpoint and Fort Greene, and out toward Maspeth and East Elmhurst in Queens. Fast dispatch from 7am to 7pm, Sunday through Friday, and same-day service is often possible. If you’re nearby and want the same sealing work, our duct repair & sealing page covers Murray Hill, or see what the full Air Duct Cleaning Upper East Side service includes.
Serving Upper East Side, NY – Our Local Coverage Area
We serve Upper East Side and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Duct Repair & Sealing in Upper East Side
Duct repair and sealing is the work of fixing damaged duct sections and closing the gaps, seams and disconnected joints where conditioned air escapes. It’s different from duct cleaning, which removes debris, and from HVAC cleaning, which covers the equipment. The goal is a sealed, sound duct system so the air you pay to condition actually reaches the rooms.
Most single-run or targeted repairs take a few hours, while a full-system seal with a pre-clean usually runs a full day. The time depends on how many runs are involved and how accessible the ductwork is. We confirm the expected time when the job is booked so you can plan around it.
Most jobs run somewhere between $180 for a targeted leak repair and $2,200 for a full-system seal with a pre-clean, depending on scope and access. Every job is quoted at one flat price per system, in writing, before work starts. The estimate is free and the final price is set by the estimate. Call (844) 443-3814 for an exact quote.
We use Rotobrush and Nikro systems for the cleaning and prep work that surrounds a repair, and we also service Honeywell and Aprilaire air-quality products. That means the cleaning, the repair and any filtration upgrade can be handled in a single visit. The equipment choice is matched to the job, not the other way around.
We take before-and-after photos of your own ducts, not stock images, so you can see the repair and the seal for yourself. We also run the system with you at the end to check airflow and confirm the connections hold. If the before-and-after doesn’t match what you expected, we’ll explain exactly what changed.
Same-day service is often possible, and fast dispatch runs from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We answer 24/7 on (844) 443-3814.
Clear access to any visible registers and the air handler, and move furniture away from those spots so the technician can work without obstacles. If you can, make a note of which rooms feel too hot or too cold, so the technician can trace those runs first. Turn the system off before the appointment unless told otherwise.
Schedule Your Duct Repair & Sealing Service in Upper East Side Today
If your apartment never feels even, or you can hear the duct system working against itself, a repair and sealing visit is the first step toward fixing it at the source. Our technicians have up to 14 years of experience, work with the right equipment and give you one flat price per system in writing. Call (844) 443-3814. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The estimate is free, and if you’re curious how sealing fits with a full clean, our duct repair & sealing page walks through it.
If you’re also scheduling across Greenpoint, our duct repair & sealing page covers that area.
Written by the team at Air Duct Cleaning Upper East Side.