Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Repair & Sealing Across Fort Greene
If your Fort Greene home has rooms that never warm up, dust that settles right after you clean, or a heating bill that climbs while comfort drops, leaking ductwork is usually the culprit. We repair and seal ductwork across Fort Greene, from the brownstones around Fort Greene Park to the condo conversions along Myrtle and Flatbush. Our technicians have up to 14 years of experience finding leaks that hide inside shared chases and party-wall cavities – the kind of problem this neighborhood produces more than most. One flat price per system, agreed before work starts, with before-and-after photos of your own ducts. Call (844) 443-3814.

Why Fort Greene Homeowners Call Air Duct Cleaning Upper East Side for Duct Repair & Sealing
Fort Greene buildings punish ductwork in ways that detached suburban houses never do. Duct runs pass through uninsulated party-wall cavities and original chimney chases, and a leaky joint there can push dust straight into the unit next door. That single fact changes how the work has to be done: negative-pressure containment, careful staging, sealing that holds long-term rather than a quick wrap of tape.
We know the streets here. Myrtle and Flatbush carry a steady stream of newer condo conversions with retrofitted forced-air systems squeezed into chases built for gravity heat. Around Fort Greene Park, the mid-to-late 19th-century brownstones and rowhouses have had generations of renovation work done in and around their duct runs. We plan for that before we arrive.
For property managers of the large prewar apartment buildings in Fort Greene, shared systems and shared dryer vent stacks mean coordination matters as much as technique. Scheduling, access, and keeping one unit’s dust out of another’s are part of the job.
When you call, we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We connect you with a local professional who is licensed and insured as their state requires, and the estimate is free.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Duct Repair & Sealing Services in Fort Greene
Duct Sealing
Sealing is where the biggest airflow gains live, especially in Fort Greene brownstones where sections of duct pass through uninsulated party-wall cavities. We locate leaks with camera inspection and pressure testing, then seal joints and seams so the air goes to your rooms instead of your neighbor’s. For a home with a retrofit forced-air system in narrow original chases, this is the step that usually solves the “far rooms never get air” complaint.

Flex Duct Repair
Flex duct is common in the retrofit systems tucked into Fort Greene’s narrow chases, and it’s easily crushed or torn when a later renovation intrudes into the same space. We repair or reconnect the damaged run, seal it properly with mastic, and confirm airflow at the registers. Crushed flex in a tight chase can often be repaired in place – not every crushed section means a full replacement.

Metal Duct Repair
Original metal ductwork in older buildings develops joint separation, cracked seams, and fasteners that pull loose with the heating-and-cooling cycling New York City summers and winters put on a system. We repair those joints and seal them so the whole run holds pressure again. Metal looks solid from the outside; a joint can leak badly while the sheet metal itself is fine.

Duct Insulation
Uninsulated ductwork running through a shared or unheated cavity loses heat before it reaches the room and sweats in the humid summer months. We add insulation where it’s missing, sealing first so the insulation sits over a sealed system rather than a leaking one. In Fort Greene’s dense rowhouse construction, sealing and insulating together often produce the largest comfort change per dollar.
Trusted Brands We Service in Fort Greene
We work with the equipment brands that hold up in dense urban buildings. Rotobrush and Nikro rotary brush and vacuum systems handle the agitation and debris removal that a shared-chase duct run needs, and Abatement Technologies negative-air equipment lets us contain loosened material so it never drifts into a neighboring unit. When a Fort Greene home is ready for an air-quality upgrade, we install and service Honeywell and Aprilaire products as part of the same appointment. We don’t claim parts stock; the right parts get ordered for the job. Call (844) 443-3814 for a free estimate.

See the difference
Before
After
Before
After
Before
AfterCommon Duct Repair & Sealing Problems We See in Fort Greene Homes
- Leaky joints in original chimney chases. The chase is uninsulated and shared with party walls, so a leaking joint can transfer dust between units without anyone realizing where it’s coming from. This is the most common problem in Fort Greene brownstones.
- Flex duct crushed in narrow chases. Retrofit systems were squeezed into chases built for a smaller era of ducts, and later renovation work pinches or tears the flex. The result is major supply and return leaks in a location that’s hard to reach.
- Shared dryer vent stacks in multi-unit buildings. Lint accumulates deep in the run, past the trap, where simple trap cleaning never touches it. In a stacked building this is a real fire hazard, not a nuisance.
- Construction dust from successive renovations. Brownstones are constantly being updated, and fine debris settles into duct runs over time. Without proper containment during repair, loosened material migrates instead of leaving.
Here’s how a typical job usually goes in Fort Greene. A homeowner notices that the rooms farthest from the air handler never get enough airflow, even after a filter change. A qualified technician uses camera inspection and finds a retrofit forced-air system squeezed into a narrow original chase, with a disconnected flex run or crushed metal duct causing major leakage. The fix often involves reconnecting and sealing the joints with mastic, then verifying static pressure and airflow at the registers, all while keeping negative pressure so construction dust stays out of adjacent units.
Pricing for Duct Repair & Sealing in Fort Greene, NY
Estimates for duct repair and sealing in Fort Greene typically run $350 – $900 for a targeted repair, such as reconnecting a crushed flex run or sealing a section of leaky metal duct. Whole-system sealing with a full pressure test usually runs $900 – $2,200, and duct insulation for uninsulated runs in shared cavities typically runs $600 – $1,800 depending on how much access the run allows. A typical flex duct repair in Fort Greene runs $300 – $750, while a metal duct repair on original construction tends to run $400 – $1,100. Dense building access and containment requirements add some labor over a detached-house job. The written estimate sets the final price, and it’s free.
We Also Serve Cities Near Fort Greene
We serve Fort Greene and the neighborhoods around it, along with Fort Greene and the surrounding areas of Financial District, Greenpoint, Tribeca, and Battery Park City. If your building is nearby and your ducts need attention, reach out and we’ll schedule accordingly. Call (844) 443-3814 for a free estimate.
Serving Fort Greene, NY – Our Local Coverage Area
We serve Fort Greene and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Duct Repair & Sealing in Fort Greene
You can’t confirm it by eye, but persistent dust on shared walls, airflow that doesn’t match what the system should deliver, and dust appearing right after your neighbor’s renovation are the usual signs. Camera inspection and pressure testing inside the chase is what confirms a leak and shows where it’s going. Call (844) 443-3814 for a free estimate.
Yes, in a stacked building it very often is. Lint builds deep in the shared run past the trap, so trap cleaning alone never fixes it, and a long, partially blocked stack makes the dryer work harder and run hotter. In multi-unit buildings that’s a fire concern, not just a convenience problem. Call (844) 443-3814 for a free estimate.
It means we set up containment and exhaust so loosened dust is pulled out of the work area rather than drifting into your unit or the one next door. We use Abatement Technologies negative-air equipment for this. In party-wall construction it’s essential, not optional. Call (844) 443-3814 for a free estimate.
Because the metal can be sound while the joints leak. Fasteners loosen and seams separate as the system cycles between heating and cooling, and a leaking joint can pass significant air without any visible crack. Pressure testing reveals leaks that a visual inspection misses. Call (844) 443-3814 for a free estimate.
Often, yes. A crushed section in an accessible chase can frequently be reconnected and sealed with mastic, then verified with a static pressure check at the register. If the run is torn or access is impossible, we’ll tell you straight and quote a replacement. Call (844) 443-3814 for a free estimate.
Ready to stop losing air to your chases and cavities? Call (844) 443-3814. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often possible – ask when you call. One flat price per system, agreed before work starts, backed by a satisfaction guarantee. For the full range of what we do, see our duct repair & sealing work.
Written by the team at Air Duct Cleaning Upper East Side.